Cast Iron Mining Jaw Crusher Spare Parts

Material: High Manganese Steel
Color: Red
Type: Jaw Crusher
Process Type: Casting
Condition: New
Product Name: Toggle Plate
Suitable For: Metso Pegson

     

  • Description

Application

The Stone crusher is widely used in mining, building materials, chemical industry, metallurgy and so on. The Stone Crusher is suitable for primary and secondary crushing all kinds of minerals and rocks with compressive strength less than 320 MPa.

Advantage

1. Simple structure.

2.easy maintenance.

3. High crushing ratio.

4. even output granularity.

Working Principle

The strip and strip pulley are driven by a motor, and the movable jaw moves up and down via eccentric shaft. The angle between fixed jaw and movable jaw becomes smaller when the movable jaw runs down, then the materials are crushed into pieces. It will become bigger when the movable jaw runs up. The movable jaw board leaves the fixed jaw board under the action of pole and spring , then the end products come out from the crushing cavity.

Techniacal data of PE 400×600 jaw crusher

 

Model
Specification(mm)
Max feeding
size(mm)
Output(t/h)
Power(kw)
Overall dimension(mm)
Weight(t)
PE150×250
150×250
125
1-3
5.5
896×745×935
0.81
PE250×400
250×400
210
5-20
15
1430×1310×1340
2.8
PE400×600
400×600
340
15-50
30
1700×1732×1653
6.5
PE500×750
500×750
425
15-65
55
2035×1921×2000
10.3
PE600×900
600×900
500
45-110
55-75
2290×2206×2370
15.5
PE750×1060
750×1060
630
105-195
90
2655×2302×3110
28
PE900×1060
900×1060
750
90-215
110
3075×2580×3110
35
PE900×1200
900×1200
750
90-220
110
3800×3166×3045
50
PEX250×750
250×750
210
15-30
22
1667×1545×1020
4.9
PEX250×1000
250×1000
210
15-50
30-37
1550×1964×1380
6.5
PEX250×1200
250×1200
210
20-60
37
2192×1900×1950
8.

Handling Precautions of High Manganese Steel Jaw Crusher Plate chunyue crusher liner plate toggle plate

1. After starting crusher in operation, once the crusher makes an unusual percussion sound, we should stop moving forward ,identifying and eliminating defects , restart.

2. Crusher must be no-load to start. When the crusher is operating normally and then open to the mining equipments .We should add the ore mine to equipment gradually until full up .

3. Crusher should be given mine well-proportioned, ore can’t packed with crushing cavity ; to the maximum size don’t allow to exceed mine to the mine mouth width of 0.85 times; the same time when the crusher gives mine ,we should avoid the mine ore iron and the iron abundance of non- crushing material into crusher; Once we find non-crushing material through the port of discharge ,we shall immediately notify the belt transport staffs take measures in time, so as not to causing serious equipment accidents when mine will go into the next crusher.

Pe400*600 – Buy Pe400*600,Pe400*600,Pe400*600

 

Request for Quotation

Please leave your information to get the latest quotation and product catalogue!